The dust and mist removal gun machine is based on the principle of air supply. It uses a high-pressure pump and a fine atomizing nozzle to atomize the water, and then uses the airflow and pressure of the fan to transport the atomized water mist to a long distance, so that the water mist can reach a long distance. It can have a relatively large area, and the tiny artificial fog particles emitted will float in the air for a period of time. The length of fog generated by a single nozzle can reach 3-5 meters, the width of fog is 1-2 meters, and water mist and dust will condense. After landing, to achieve dust reduction. At present, in many open-air storage yards and workplaces, work dust and local dust are difficult problems in dust control. In the past, many companies used water spraying for treatment, but problems such as small coverage area and high water consumption have made the effectiveness of water spraying treatment unsatisfactory.

The water mist emitted by the fog monitor absorbs, accumulates and settles with PM2.5 and PM10 dust particles suspended in the air, so as to reduce pollutants and haze. The water spray consumption is 20-30% of that of the traditional sprinkler nozzle, while the area of spray is more than 20 times higher. According to relevant data, when the fog gun machine is put into dust control, the PM10 in the air is reduced by 10% -20%, and PM2.5 is reduced by 3% -5%.

Fog cannon uses electricity to pressurize water, atomize it through a nozzle, and under the action of a fan, blow the water mist to a distant place. Specifically, atomized particles collide and adsorb with suspended dust in the air, and settle under the action of gravity. The dust capture of fog droplets is transformed into inertial collision, interception and capture, gravity settling, Brownian diffusion, and electrostatic effects.

Fog Cannon Machine - Features and Technical Advantages:

1. Long range: each fog gun machine has been strictly debugged and can only be shipped if it is qualified, and the spray distance is detected.

2. Low power and energy consumption: The fan adopts direct start, soft start, variable frequency start, and PLC control.

3. spray effect is better: high-quality sprayer is selected to reduce dust quickly and spray more evenly.

4. Wide coverage: The range of the fog gun machine is optional from 20 to 150 meters, and the size of the fog can be adjusted, making it highly practical.

5. Powerful control function: fixed dedusting spray is equipped with manual, remote and remote control functions

6. Anti freezing and preheating design: self limiting heat tracing belt is selected to prevent freezing and freezing on the spray ring and water pump, meeting winter usage requirements

7. Low noise: Adopting shockproof and noise reduction technology, fully in line with environmental protection.

8. Easy installation and cost saving: The dust and mist removal gun machine is easy to install, saves space, and has a user-friendly design for the base, making it easy to fix.