How to Correctly Repair Diesel Generator
Updatetime:3/15/2019 3:54:08 PM Hits:
1. Generators can not be connected to the grid, but it is forbidden to cancel the interlocking circuit in the screen. When the power is restored, the unit confirms the running time. The operation of the main switch on the secondary control panel is not restricted by "manual" or "automatic", but it should be used cautiously.
2. When the unit runs at full speed, it is not allowed to change the "manual" or "automatic" switching position. The stop position of "test machine" is "emergency position". Therefore, when the test machine stops, the unit automatically stops after idling operation, and the unit enters the "emergency" state.
3. Setting value of overcurrent protection for main control panel and secondary control panel. When leaving the factory, the main control panel is set on the generator current rating, Weichai diesel generator set, and the secondary control panel is set on the main switch rating. Therefore, after installation, it should be adjusted according to unit rating and power grid conditions.
4. If the main and auxiliary control screens need to be cut off during installation or maintenance, the main control panel should be placed in the "manual" position and the secondary control panel should be opened by a knife switch. Conversely, the palace type should be restored first with the auxiliary screen knife switch and the main switch, and then the main control screen should be placed in the "automatic" position.
