How to solve the problem of insufficient generator power?
Updatetime:3/15/2019 3:53:27 PM Hits:
1. Replace the filter core and precipitation core of diesel generator, restart the engine after correct assembly and generate electricity, and stop automatically when the load reaches 160A current.
2. It is found that the moisture content in diesel oil is high when the discharge valve of the tank is blown down. After removing the moisture, the engine is restarted by installing the discharge valve. When the negative energy reaches 200A, the engine will stop.
3. Open the drain valve of the tank and completely release all the diesel oil in the tank. It is found that there are many impurities and dirt in the diesel oil. Wash the tank with high-pressure pump gas, Then refill (with sandcloth filter oil) to wash the tank back and forth and release the oil containing dirty impurities until the released oil is very clear and free of impurities.
